BIOGREASE-EP

BIOGREASE EP0:
REAL Resistance

SEAL-OF-APPROVALEnvironmentally Acceptable Grease combining corrosion protection with excellent resistance to wash off from rain and seawater

  • Excellent resistance to water wash off
  • Long lasting corrosion protection
  • Good load carrying properties
  • Resistant to oxidation

For rudder stocks and propeller hubs and caps

BIOGREASE EP0 – AT A GLANCE
Attribute Test Result
Water Wash Out ASTM D1264 Excellent
Corrosion Protection ASTM D4048 Copper Corrosion Good (1 max)
ASTM D6138 Rust (Fresh and Salt Water) No corrosion
Wear Protection ASTM D2266 Good
Elastomer Compatibility ASTM D4289 Nitrile, Fluoroelastomers Compatible
VGP Compliant

Ecolabel_logoThe EU Ecolabel is a label of environmental excellence that is awarded to products and services meeting high environmental standards throughout their life cycle: from raw material extraction, to production, distribution and disposal.

EU Ecolabel licence number UK/027/019 has been awarded to BIOGREASE EP0.

BIOGREASE EP0 is a Lithium/Calcium thickened lubricating grease based on fully saturated synthetic esters. It offers improved operation and lower environmental risk leading to overall cost savings.

BIOGREASE EP0 is designed for use in sensitive marine environments and can be used in a variety of marine applications which demand a semi-fluid NLGI 0 grease, primarily for rudder stocks (centralized lubrication systems) and propeller hubs and caps.

BIOGREASE EP0 may be applied manually or via a centralized lubrication system using suitable pumps. The grease also has a wide operating temperature with a lower working temperature of -25°C and an upper temperature of +140°C.

BIOGREASE EP0 has a biodegradability of greater than 60% in the 28 days OECD 301B test and is proven to be non-toxic in the marine environment based on the following results:

FISH DAPHNIA ALGAE
LC50 exceeds 1000 mg/l EC50 exceeds 1000 mg/l EC50 exceeds 1000 mg/l

BIOGREASE EP0 meets the detailed ecological definitions and requirements laid down in the 2013 Vessel General Permit (VGP) published by the US EPA in March 2013.

Attribute Benefit
Wider operating temperature Protects equipment from -25ºC to +140ºC
Good adhesion Resists the washing action of rain and seawater
Good corrosion protection Provides rust resistance to steel and copper
Reduces wear and friction Protects and extends equipment life
Good elastomer compatibility Compatible with most sealing materials including Nitrile and Fluoroelastomers
Biodegradable and minimally toxic Lower environmental risk

Need more information about this product?

BIOGREASE EP0 VGP Compliance statement PDF
Download the Product Data Sheet PDF
Download Instructions For Use PDF
Request Safety Information (SDS)
Download Product Literature PDF